Items 项目 | Characteristics 性能要求 |
Operating Temp 工作温度范围 | -55℃~+105℃ |
Rated Voltage Range 额定电压范围 | 4V.DC～25V.DC |
Nominal Cap.Range 容量范围 | 10～560uF |
Capacitance Tolerance 容量偏差 | ±20%（120Hz,+20℃） |
Leakage Current 漏电流(Max) | I=0.2CV or 500uA, whichever is greater. After 2 minutes whichever is greater measured with rated Working Voltage at 20℃ |
DF (Max) Tanδ (20℃,120Hz) | Rated Voltage(V) | 4 | 6.3 | 10 | 16 | 20 | 25 |
Tanδ | 0.08 | 0.12 |
ESR(100K~300KHz, 20℃) | Value in Characteristics table |
Temperature Characteristic 温度特性(IR at 100KHz) | Z(+105℃)/ Z(+20℃)≤1.25 Z( -55℃ )/ Z(+20℃)≤1.25 |
Load Life 负载寿命 | After applying rated voltage with Max ripple current for 5000hrs at 105℃,the capacitors shall meet the following requirements Capacitance ChangeWithin ±20% of theinitial valueDissipation FactorNot more than150% of the specified valueESRNot more than150% of the specified valueLeakage Current Not more than the specified value
|
Humidity Test 湿热测试 | After subjecting 90 to 95% RH for 1000hours at 60℃,no voltage, The capacitors shall meet The requirement as Endurance Capacitance ChangeWithin ±20% of the initial valueDissipation FactorNot more than150% of the specified valueESRNot more than0%of the specified valueLeakage Current Not more than the spcified value
|
Surge Test 浪涌测试 | After subjecting to 1000 cycles each consisting of charge with the Surge Voltage specified at Normal temperature for 30 seconds through a protective resistor and discharge for 5 minutes 30 seconds, the capacitors shall meet the following requirements. Capacitance ChangeWithin ±20% of the initial valueDissipation FactorNot more than150% of the specified valueESRNot more than150% of the specified valueLeakage Current Not more than the specified value
|
